Power Control Centers
TECHNICAL SPECIFICATION
- The power control centers we offer to clients have got a high usage in power generating plants for captive consumption. These products are designed in two or three tier construction with a single and double bush sbar system. We also conduct
- stringent quality checks on our products before delivering them to the clients end. These quality checks ensure their long-lasting and flawless performance.We offer a high range of power control centers, which is developed to meet the desired
- specifications of our clients. Manufactured up to 4000A rating, this is available with switch boards, which are offered in fixed and semi-draw out type configuration showcasing single front design.
| Insulation Voltage: 660V | |
|
|
|
| Ambient Temperature: 40 degree Celsius | |
| Form of Separation: IS 8623, Form IV | |
| Short Circuit withstand Capacity: 50 KA | |
| Degree of Protection: IP:52 | |
| Construction | |
| Modular design | |
| Free standing | |
| Floor mounting type using 2.0/1.6 mm CRCA sheet. | |
| The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired. | |
| Finish | |
| The entire panel will undergo pre-treatment covering decreasing, water rinsing & de-rusting/ phosphate. It will be synthetic enamel painted or powder coated as per requirements. | |
| Bus Bars & Internal Wiring | |
| Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthling Bus Bars will be running all along the board. | |
| Switch gears/ Components | |
| Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. | |
| Standards | |
| Ours Panels conform to the standards such as, IS 4237; IS 8623; IS 375 | |
| Switch gears/ Components | |
| Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. | |